Install Standard/Light Install Heavy
NOSE GEAR SUPPORT BRACE KIT:
$40 for the kit; includes brace plate, 5 mounting clamps and all mounting hardware
Recommended for Challenger and Excalibur ultralights, to compliment our Trailing Link Suspension Nose Gear. Provides extra strength to the frame during side load impacts.
Z-bend with pre-cut slots for hose clamps (tight fit)
This brace has a Z-bend to help improve the positioning. Install brace with the upper bends facing aft.
Left Photo: Forward View; Right Photo: ← (forward)
Left Photo: AFT View; Right Photo: Installed in an Excalibur Ultralight
WHEEL AND TIRE (Standard and Light Units):
$80 for the wheel and tire mounted on the unit
Tire 11" height x 4.00" width
6 ply, load rating of 625 lbs
Rim 5" diameter x 3.25" width
Welded One Piece Rim
(Shown on older units, wheel and tire in photo still the same)
WHEEL AND TIRE (Heavy Units):
$150 for the wheel and tire mounted on the unit
Air Trac Tire 13.50" height x 5.00" width
4 ply, load rating of 800 lbs
Rim 5" diameter
Welded One Piece Rim
Ordering order@customflightsystems.com
Information & Technical Support info@customflightsystems.com