Install Standard/Light Install Heavy
Our Customers have proven again and again to be our greatest form of advertising.
Without our valued customers we would not be expanding as fast as we have been.
We thank each and every one of you spreading the word about Custom Flight Systems
and our Trailing Link Suspension Nose Gear!
"We successfully installed the TLS onto our UAV (Martin3 S100 variant) and the nose gear received quite a bit of praise at the recent unveiling. Thanks again for sending us the preliminary pics/info while we were considering the TLS. It's a great fit for the airframe, and we expect great results when we start taxi and flight tests."
~Aerocross Systems - Unmanned Air Vehicle (UAV) http://www.aerocross.com
(Custom Flight Systems Customer)
"I received the new trailing-link nose gear -- it looks very good and is very well made! I hate to lose my purty nose wheel pant, but it beats walking back home because of a crunched front end due to a weak component, eh? If anyone says your gear is "too expensive" ask them to check out the replacement prices from Quad City for a new nose cone and that flimsy CH nose gear! I landed the CH II at a sod strip a few miles north of Platte Valley Airport (18V) in Colorado is weekend -- OmiGawd it was rough strip! I was really glad that I'd installed your standard nose wheel conversion, because it's almost certain that the original nose gear would have suffered badly in the same circumstance."
~Frank E. Millis (Custom Flight Systems Customer)
"Back in the hanger after the first flight with the new nose gear. What a difference! Like comparing a Cadillac with a Mack truck. Rough field or paved runway, this is one fine addition to a great aircraft!"
~John Olive (Custom Flight Systems Customer)
"I got my gear and it fits perfectly. Total install time was less than 30 minutes."
~Randy Homyk - Excalibur Ultralight (Custom Flight Systems Customer)
"Thanks so putting out a quality product that really works. You are aware that the weakest point of the Challenger is the nose gear. Anyone who says they have never bent one has not flown one! I bent one just taxing! Thanks to you we now have a nose gear system that really works like it should. If you bend this baby you are also going to have a sore back! It works great on grass and pavement. I really like it. THANKS!!"
~Gary Weaver (Custom Flight Systems Repeat Customer)~
"I was very pleased with the quality and workmanship of the nose wheel fork when I received it. I was also impressed with the speed with which my order was processed. I feel that it will be a great addition to my plane."
~Charles Swanson (Custom Flight Systems Customer)
"Just wanted to say thanks to Wade for a very good product. If I had purchased your CUSTOM FLIGHT SYSTEM NOSE GEAR when I built my plane I would not have had to replace the cross support tube and a new fork!!!! If anybody out there is wondering if your nose gear is worth the money or not , just try it , because I don't think you will be pleased , I KNOW you will be PLEASED!!!! My strip is a 875FT grass strip , and it is IMPOSSIBLE to explain how SMOOOOOTH it is . The only way I know to explain is like a REDNECK ,it is as SMOOOOTH as TENNESSEE WHISKEY!!!! Thanks again for a GREAT product."
~William Don Hargraves (Custom Flight Systems Customer)
If you are a Custom Flight Systems Customer that would like to submit a testimonial and picture. Contact web@customfightsystems.com
Ordering order@customflightsystems.com
Information & Technical Support info@customflightsystems.com